Flint-walling CPJS Shallow Well Manuel d'utilisateur télécharger pdf (Page 16)

PUMP ELECTRICAL CONNECTIONS

3. Insert an electrical wire strain relief into the opening

in the side of the pressure switch closest to the motor.

(Fig. 3)

IL1372

IL1373

Wire from

motor

IL1374

Wire from

motor

IL1375

Wire from

motor

Ground Screws

6. Connect the green ground wire from the motor cable

to one of the green ground screws at the bottom of the

pressure switch. (Fig. 6)

5. Connect the two motor wires of the motor cable to the

two inside terminals on the pressure switch. (Fig. 5)

4. Thread the cable from the pump motor through the

strain relief into the pressure switch cavity and tighten

both screws on the strain relief. Do not crush wire.

(Fig. 4)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Flint-walling CPJS Shallow Well Manuel d'utilisateur Page 16